The Ultimate Guide to Removing Molds and Mildews from Clothing
When exposed to the slightest amounts of moisture, the millions of microscopic mold spores lying dormant across your home will activate. These spores are far too small to be seen and can waft into the home carried on the wind from colonies of mold many miles away.
Molds need one other ingredients to form a well-established colony, organic matter. Wood, paper, leather, wool, cotton and silk are made of organic materials and make good food sources for a mold population.
This is a considerable problem because the blackening growth can besmirch your personal belongings in very little time. Within a matter of weeks and under the right conditions a mold and mildew colony can work its way through an entire wardrobe leaving headaches and heartaches in its wake.
While keeping the atmosphere hostile to molds and mildews is essential to preserving your clothing (and you will find a section dedicated to the subject of Mold and Mildew Prevention further in the article) it is important to know that these organic vermin can be eliminated if you catch the problem in time.
Tips for Removing Mold from Clothes
Successfully removing the molds and mildews from your clothing requires a little experience in fabric care: Here are some helpful pointers to understand before beginning:
Act Fast– If you see that an area of your home or an item you had in storage is suddenly presenting signs of mold damage, this is an important sign. You can bet that there are other areas of the home that may be hosting a mold invasion. You will want to act as fast as you can. Do an inventory of your stored items and check carefully for signs of blacening along edges and corners of storage containers, boxes, crates, trunks and cases.
The longer the molds have a chance to build their establishments, the more damage can be done. Molds, mildews and moisture regularly turn solid oak trees to mulch. They can certainly eat through a fine leather jacket or pair of jeans if given time. Furthermore, as the mold damage gets bigger, the likelihood of fully restoring the colors and fabrics diminishes.
Health Concerns– Another important reason to have your storage cleaned from molds and mildews is the health risks they can pose to you and those living with you. Spores can be inhaled and cause health conditions as well as excite allergies causing greater issues to those with asthma or other respiratory conditions. If these spores and moldy clothes are worn, prolonged contact can cause skin conditions as well. This could be a minor itch or result in cuts and abrasions that get infected easily and don’t seem to heal.
Check out this air purifier for mildew review.
Use Hot Water– While some organic fluids like blood, must be washed out with cold water, it is essential that hot water is used to neutralize the stains caused by molds. The water should be hot enough to also kill the spores and reduce the possibility of recurring issues, but also not so hot that the structural integrity of the fabrics is affected.
Multiple Cycles– when washing the effects of mold from your fabrics you will want to run your clothing through two cycles. After your clothing has been washed thoroughly, twice, you can then hang them out to dry. It is a good idea to use natural sunlight in the heat of the day for this task as the strong UV rays will finish the job effectively killing any remaining microbes. The sunlight also has elements that bleach the color from the stain restoring the proper coloring to your clothing.
Choose your Chemical– There are a great variety of products and solutions that can be used to effectively remove mold from your clothing. You will want to choose your solution according to what suits your needs and clothing best.
While you can find special mold killing detergents in the market, you can also use some other ingredients you may already have in your home. This article will illustrate the process for using bleach, borax and all-natural vinegar for effectively removing the last vestiges of molds and mildews from your fabrics.
The Bleach Method
Bleach is an effective agent often applied to eliminating the microbial menace. Additionally, bleach can assist in removing the stains left behind by the molds. But, before you apply bleach to your clothing you will want to review their care labels to ensure that the colors and fabrics will not be affected by the harsh chemicals.
If you are not sure how your fabrics will react to the bleach, and there is no care label to provide instruction, you may want to choose one of the more delicate options described further in the article. You can also check the reactions by washing a small spot with your water and bleach mixture to see if the fabric withstands the bleach.
There are also many chlorinated detergents that can be used to eliminate molds, lighten stains and restore color. Check your local supermarkets for the varieties available to you.
Begin by placing the affected fabrics into your washing machine and filling the tank with the proper amount of water. You will not need to add any more bleach than you would normally use for the amount of water and color of fabrics. Be sure to carefully read the instructions on the container to avoid adding too much bleach.
Allow your washing machine to go through the functions as normal. If you notice the colors of your fabrics are bleeding into the water, drain your washing machine and rinse the clothes well on a rinse cycle.
Alternatively, you can soak your fabrics in bleach to remove molds and mildew.
A half cup of bleach to a gallon of water is a good rule of thumb, but you will need to follow the instructions on the bleach you are using.
Allow the clothes to soak for a few hours. Make sure to check them and rinse them out quickly if you notice their colors are beginning to run.
After they have soaked, you should continue the next step of the cleaning process by running your fabrics through a cycle in the washing machine.
The Borax Method
Borax is an all-natural cleaning agent that won’t damage your fabrics or emit any toxic fumes. There are laundry detergents that can be used that contain borax. Alternatively, you can purchase borax at many locations and add this to your regular wash cycles.
If you will be using your own borax, you will need to thoroughly dissolve the substance in hot water before adding it to your washing machine.
Place clothes in the washing machine and fill the tank to the appropriate levels.
Add the borax and hot water mixture to the water in the machine.
Allow the washing cycle to continue as normal.
The White Vinegar method
Vinegars are effective at killing 82% of the molds and mildews that can attack your clothing. Furthermore, vinegar will effectively remove the musty odor collected by clothing kept long in storage and exposed to the spores.
Fill the washing machine with the clothing that needs to be washed. Add the correct amounts of detergents to the water as well.
You will want to add a cup and half of vinegar to a full washing machine.
Allow the washing cycle to continue as normal.
Alternatively, you can soak your clothing in a vinegar solution that will address the mold conditions.
Use a cup of white vinegar for a full bucket of water and allow your clothing to soak for an hour.
Remove from the bucket and wash the clothing in a washing machine for a full cycle.
If the musty smell is still in the clothing after you have washed it, you should repeat the process.
Mold and Mildew Prevention
While molds and mildews can strike anywhere, those places in the tropics or with higher humidity levels are more prone to this problem. But, a little prevention goes a long way, following are a few ideas that can help you keep your clothing safe from molds.
Wet clothing presents the optimal conditions for a mold colony. It is essential that your closets, storage rooms, chests and drawers are completely free of moisture. In addition to moisture absorbing packaging materials, you should conduct a regular inventory to ascertain the mold threat in your home.
Clothing will get wet from simply being worn, if this is thrown into a heap for a week, you could expect a mold colony on your return. Always keep your clothes clean and dry. Hang up sweaty shirts, pants and socks to air out if needed before throwing them in the hamper. Hampers should be washed regularly to avoid mold growth and wet clothes should never be hung up with clean clothes.
In Closing– the threat of molds in the home is a serious problem. While this is more serious in certain areas, keeping your home clean and moisture free is the best way to keep the molds at bay and preserve the longevity of your belongings and clothing.
- Best Air Purifiers For Smoke
- How To Measure Air Quality
- The Causes Of Indoor Air Pollution
- 10 Ways To Improve Indoor Air Quality
- 12 Ways To Enjoy More Fresh Air and Sunlight
- The Top 10 Air Filtering House Plants To Have In Your Home
- Children’s Asthma and Allergy Symptoms
- What Is A Hepa Filter?
- How To Clean a Hepa Filter?
At Comfy Home Corner- https://comfyhomecorner.com we are dedicated in providing the best tips and product reviews to assist you with creating a better environment for your home.