How to brighten your background with solar landscape lighting

Home security is always a big concern for modern homeowner. As one, the last you want it burger coming into your home without your knowledge. You don’t want stepping onto something because the pathway to our house is darkened.


Thanks to technology, you don’t have to worry about such things. There are many things today that can give you enough light in your home. The most common method is through the use of solar landscape lights. These lights are sufficient enough to keep your bright during the night.

In this guide, we are going to share a few tips on how best to use the lights.

What are solar landscaping lights?

Perhaps you have already seen these lights in your neighbour’s home and wonder what they are. In that case, it is vital that you learn about them before buying.

There is not much fuse about the lights. They are simply small solar panel used to charge batteries within light housing. There are small light-emitting diode (LED) bulbs which are powered by the batteries.

Such LED lights are common along pathways and flowerbeds. When darkness falls, you will see them on. One of the reasons such light have become common and useful today is that they are the best option on saving energy. Instead of using too much electricity, one can install such lights in their home.

Solar landscaping light may be costly during the initial purchase, but they are an investment worth your time. With time, you will realize they have offered you better service and saved you a lot of cash.

If you want your background to be lit in a proper manner, it is vital that you choose the right lights. Since there are so many products on the market today, you want to get one that is genuine and of high quality.

How to use solar landscaping lights

They are quite easy to use. First, you need to buy the right ones. The internet is full of such products and can help you get the right ones but you have to be very careful as most are not genuine.

After buying the next step is installation. Each light comes with installation instructions, which are generally similar for most products. Since they are wireless, installing should not be such a big deal.

Identify the perfect spot. One thing about solar lights is that they do not tolerate blockage. For this reason, you want to make sure they are placed somewhere they can get maximum sunlight. Consider an open area. If you are installing them in an area with flowers for instance, keep them higher.

Finally, do not forget to keep the lights in check. As much as you want to get the best from them, ensure proper maintenance to keep them safe.

Do Solar landscaping light stay bright forever?

When still new, you will realize the LED bulbs are giving maximum light. Apart from that, the battery capacity is quite strong and can serve you for a long time before dimming.

However, as time goes by, you their brightness begins to fade. And it may get worse, to a point where they are not as bright as you expect them to be. Some of the reasons for such occurrence include:

  • Environment factors. This include situations where there is no enough sunlight to charge the batteries. For instance, during winter and rainy season, sunshine is very limited.
  • Aging. As you may already know, batteries, even the most advanced ones degrade over time. As such, they may not be as powerful as when they were new.

And this is where many people don’t know what to do. Some will just ignore, while other will go for new lights. But there may be another easy solution.

How to brighten your solar landscaping lights

You can improve the performance of your lights to give you optimal brightness. All you need is some maintenance ideas. Here are some:


  • A damp paper towel
  • Small, Phillips-head screwdriver
  • A fine-grit sandpaper
  • A toothpick
  • Solar battery

Step 1: Examine each solar light or panel at the top part

Sometimes the top part may be separated from the light. General, the panel is always on top of the lamp though in some models they are separated. Check for debris, carefully brushing them off and cleaning with a dumb paper towel. Even small amounts of debris may block maximum sunlight from reaching the solar.

Step 2: Observe

During the day, keep eyes on the cleaned lights ensuring maximum solar hits them. Do this periodically during the day, ensuring there is no shade from stray plant leaves covering the lights. If you notice the area is losing access to sunlight, move the lights to another area. Keep note of the area you originally intended to install them when moving so that you don’t go further than 2 feet away.

Step 3: Check again during the night

The light should be brighter now. Check a few times during the night and if you notice some lights are dimmers, wait until daybreak to take the next action. Then use the screwdriver to remove the lead of each dim light. Remove any dirt and debris inside – this may come from rain and wind. Such makes the lights dim. Ensure you check the battery compartment in each light. If there is corrosion, clean replace the battery and cover it up.

Step 4: If some lights are still dim, revamp them

You can replace the batteries in such lights. Disassemble the housing with your screwdriver, remove the old battery and replace with new ones before reassembling the housing. All your lights should shine brighter now.

Final thought

If you want your solar lights to last longer and shine brighter, maintain them properly. Always clean the solar panel regularly. Apart from that, compare models when purchasing. Some lights are meant for ambient access only and not bright lighting. You want to make sure you have the right one. Finally, ensure the battery or batteries are in good shape. Consider replacing them every after two years.